Table Of Contents; Important Safety Instructions; Safety Guidelines - Definitions - Delta 36-T30 T3 Manual

IMPORTANT SAFETY INSTRUCTIONS ................................... 2
SAFETY GUIDELINES - DEFINITIONS .................................... 2
GENERAL SAFETY RULES ...................................................... 3
FUNCTIONAL DESCRIPTION .................................................. 4
CARTON CONTENTS ................................................................ 4
ASSEMBLY ................................................................................. 5

IMPORTANT SAFETY INSTRUCTIONS

Read and understand all warnings and operation instructions before using any tool or
equipment. Always follow basic safety precautions to reduce the risk of personal injury.
Improper operation, maintenance or modification of tools or equipment could result in serious injury and
property damage. There are certain applications for which tools and equipment are designed. This product should
NOT be modified and/or used for any application other than that for which it was designed.
If you have any questions relative to its application DO NOT use the product until you have written DELTA® Power
Equipment Corporation and we have advised you. Contact us online at www. DeltaMachinery.com or by mail
at Technical Service Manager, DELTA® Power Equipment Corporation, 99 Rousch Street, Anderson, SC 29625.
Information regarding the safe and proper operation of this tool is available from the following sources:
• Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at
www.powertoolinstitute.com
• National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201
• American National Standards Institute, 25 West 43rd Street, 4th floor, New York, NY 10036
www.ansi.org - ANSI 01.1 Safety Requirements for Woodworking Machines
• U.S. Department of Labor regulations www.osha.gov

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and understand. This information relates to
protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we
use the symbols below. Please read the manual and pay attention to these sections.
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
indicates a practice not related to personal injury which, if not avoided, may result in property
NOTICE:
damage.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to the State of California to cause cancer, birth defects or other
reproductive harm.
- Lead from lead-based paints
- Crystalline silica from bricks and cement and other masonry products
- Arsenic and chromium from chemically-treated lumber (CCA)
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well-ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.

TABLE OF CONTENTS

SAVE THESE INSTRUCTIONS.
PROPOSITION 65 WARNING:
OPERATION AND ADJUSTMENTS ......................................... 8
TROUBLESHOOTING ............................................................. 11
MAINTENANCE ....................................................................... 11
SERVICE ................................................................................... 11
ACCESSORIES ........................................................................ 12
WARRANTY ............................................................................. 12
2