Cleaning The Hose Filter; Cleaning The Impellers - Beko DFN29330W Instruction Manual

A
Do not remove the micro filter
cleaning mechnanism (4) for
cleaning (D).
4. Clean all three filters under tap
water by means of a brush.
5. Replace the metal/plastic filter.
6. Place the coarse filter into the
microfilter. Make sure that it is
properly seated. Turn the coarse
filter clockwise until a "click"
sound is heard.
A
Do not use the dishwasher
without filter.
C
Incorrect placement of the filters
will reduce washing efficiency.

Cleaning the hose filter

Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust,
etc.) can be prevented by means of
the filter attached to the water inlet
hose. Check the filter and the hose
regularly and clean them if necessary.
1. Turn off the tap and remove the
hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its
seat in the hose.
4. Install the hose to tap.
(depends on the model)

Cleaning the impellers

Clean the impellers at least once
a week in order for the machine
operates efficiently.
Lower impeller
Check if the holes on the lower
impeller (1) are clogged. If they
are clogged, remove and clean the
impeller. Pull the lower impeller up to
remove it (A, B).
40 EN