Table of Contents
Advertisement
A smear remains on glasses that resembles milk stain which can not
be removed when wiped by hand. A bluish / rainbow appearance
occurs when the glass is pointed to light.
•
Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled
rinse aid when adding rinse aid.
•
Corrosion has occurred on glass due to soft water. >>> Measure the hard-
ness of the supply water appropriately and check the water hardness
setting. If your supply water is soft (<5 dH), do not use salt. Choose prog-
rammes that wash in higher temperatures (e.g. 60-65°C). You can also use
glass protective detergents that are commercially available.
Foam forms in the machine.
•
Dishes are washed with hand-wash detergent by hand but not rinsed be-
fore placing them into the machine. >>> Hand-wash detergents do not
contain antifoam. There is no need to hand-wash the dishes before pla-
cing them into the machine. Removing the coarse soil on the dishes under
tap water, with a tissue paper or fork will be sufficient.
•
Rinse aid has spilled into the machine when adding rinse aid. >>> Take
care that rinse aid is not spilled in the machine when you are filling it.
Clean any spilled rinse ait with the help of a tissue paper/towel.
•
Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the
rinse aid reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
•
Dishes are not placed orderly in the machine. >>> Load the dishes as desc-
ribed in the user manual.
•
Baskets are overloaded. >>> Do not overload the baskets in excess of
their capacity.
Water remains in the dishwasher at the end of the programme.
•
Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section "Cleaning and Care".
•
Discharge hose is clogged/blocked. >>> Check the discharge hose. If ne-
cessary, remove the discharge hose, clear the blockage and insert is as
illustrated in the user manual.
C
If you cannot eliminate the problem although you follow the instructions in
this section, consult your dealer or the Authorised Service Agent. Never try
to repair a nonfunctional product yourself.
47 EN
Advertisement
Table of Contents
