Springtree SM-8 User Manual page 8

Springtree Media Group
Safety
1. Do not expose this unit to moisture to reduce the risk of electrical shock or fire.
2. Be sure that the local power outlet matches the required voltage for your unit.
3. Do not attempt to operate this unit if the power cord has been frayed or
broken. Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical shock and fire
in case of an internal short.
4. Disconnect from main power before making any type of connection.
5. This fixture is intended for indoor use ONLY!
Troubleshooting
1. Check that the 12V power supply is plugged in and connected to the SM-8.
2. Check that the DMX cables are connected properly and are wired correctly.
3. Is the SM-8 receiving DMX from the controller? DMX from the controller will
override the SM-8.
4. Many computers running lighting software will continuously send out a DMX
signal, making your Wall Station inoperable. Shutting down and closing out your
lighting software should solve this problem. If, you want to keep your computer
up and running while using Wall Stations, we offer a Console Toggle Switch.
Console Toggle Switches allow you to manually switch control back-and-forth
between your computer and Wall Station.
SM-8 & SS-8
8