Table of Contents
Advertisement
Springtree Media Group
Programming
1. Hold down buttons 1 and 8 to enter programming mode (light will
turn red).
2. Set desired look on lighting console.
3. Press desired preset button 1-8. Light will flash. Scene is stored.
4. Set new look on lighting console.
5. Press another unused button or record over existing scene by
selecting button.
6. Repeat until all 8 scenes are recorded.
7. Hold down buttons 1 and 8 to exit programming mode.
Setting Fade Rate
1. Hold down buttons 2 and 7 to enter secondary programming
mode for setting fade rate (light turns yellow).
2. Select 1 for 1 second. 2 for 2 seconds. 3 for 3 seconds. 4 for 4
seconds and 8 for instant (no fade rate).
3. Hold down 2 and 7 to exit program mode.
If DMX is present at wall station, DMX passes and the wall station is
inoperable
SM-8 & SS-8
7
Advertisement
Table of Contents
Need help?
Do you have a question about the SM-8 and is the answer not in the manual?