HOMCOM 370-066 Owner's Manual page 16

Assembly steps
⑦ ⑥
E
A
D
Driving wheel installation:
● Turn the bottom of the toy car up as above picture show.
● Put a axle sleeve and a gasket into the wheel.
● Push the wheel to the back axle and make the wheel connect well with the motor.
● Put a axle sleeve and a gasket to the other side of the wheel .
● Tighten the wheel with a M8 nut.
● Insert the Wheels cover.
● The other wheel to be installed as the same way.
①
②
⑧
D
A
E D D
E
16
④
③
B
②
⑤