Shark Rocket HV300 QS300Q Series Owner's Manual page 11

CLEANING THE BRUSHROLL
1 Use the edge of a coin to open the three locks on the bottom of the floor nozzle.
2 Run scissors along the groove in the brushroll to cut or clear away any string, carpet fibers,
hair, or other debris.
3
To reinstall the cover, line it up, then rotate down until it clicks into place. Use the edge of a
coin to close
the three locks on the bottom of the nozzle.
MAINTENANCE
NOZZLE MAINTENANCE
1 2
s h a r kc l e a n . c o m