Chapter 1 - Introduction; Specifications - DFI G4H875-P User Manual

Chapter 1 - Introduction

Specifications

Processor
The system board is equipped with Socket 478 for installing one of
the following supported processors.
®
• Intel Pentium
3.4GHz+
- Intel Hyper-Threading Technology
- FSB: 533MHz and 800MHz
®
• Intel Celeron
- 400/533MHz system data bus
• Socket 478
Chipset
• Intel 875P chipset
®
®
- Intel
®
- Intel
System Memory
• Supports dual channel (128-bit wide) memory interface
- Each channel supports 2 DIMM sockets
• Supports up to 4GB system memory
• Supports Dynamic mode to optimize system performance
• Synchronous operation with processor system bus
- PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400)
with 800MHz FSB CPU (supports PAT mode). DDR333 will
run at 320MHz memory frequency when used with 800MHz
FSB CPU.
- Use PC2100/PC2700 (DDR266/DDR333) with 533MHz
FSB CPU
- Use PC2100 (DDR266) with 400MHz FSB CPU
• Supports ECC/non-ECC DIMMs
• Supports unbuffered DIMMs
®
4 (Prescott and Northwood) processor up to
® ®
/ Celeron D processor
82875P Memory Controller Hub (MCH)
6300ESB Hance Rapids I/O Controller Hub
Introduction
1
7