Package Checklist - DFI GIC88-B User Manual

powers-off. The operating session will resume exactly where you left
off the next time you power-on the system. Refer to "Using the
Suspend to RAM Function" in appendix A for more information.
Important:
The 5VSB power source of your power supply must support
≥ 1A.
AC Power Failure Recovery
When power returns after an AC power failure, you may choose to
either power-on the system manually, let the system power-on
automatically or return to the state where you left off before power
failure occurs. Refer to "PWR Lost Resume State" in the Integrated
Peripherals section in chapter 3 for more information.
Virus Protection
Most viruses today destroy data stored in hard drives. The system
board is designed to protect the boot sector and partition table of
your hard disk drive.

1.2 Package Checklist

The system board package contains the following items:
The system board
A user's manual
One card-edge bracket mounted with 2 ser ial por ts
(GIC88-N only)
One card-edge bracket mounted with a serial por t and a
game/MIDI port (GIC88-B and GIC88-N)
One IDE cable for ATA/33, ATA/66 or ATA/100 IDE drives
One 34-pin floppy disk drive cable
One "Main Board Utility" CD
If any of these items are missing or damaged, please contact your
dealer or sales representative for assistance.
Introduction
1
15