Grundfos CRE Safety Instructions And Other Important Information page 18

Protocol
BACnet MS/TP
Modbus TCP, BACnet IP,
PROFINET, GiC/GRM IP,
EtherNet IP
LonWorks (Multi)
Standard
UL 61800-5-1, Adjustable Speed Electrical Power Drive Systems - Part 5-1: Safety Requirements - Electrical,
Thermal and Energy, Edition 1, Revision Date 02/11/2021
CSA C22.2 No. 274, Adjustable Speed Drives, Edition 2, Issue Date 04/2017
EN/IEC 61800-5-1, Adjustable Speed Electrical Power Drive Systems - Part 5-1: Safety Requirements -
Electrical, Thermal and Energy, IEC 61800-5-1:2007+AMD1:2016
UL 60730-1, Automatic Electrical Controls - Part 1: General Requirements, Edition 5, Revision Date
10/18/2021
CAN/CSA E 60730-1, Automatic Electrical Controls - Part 1: General Requirements, Edition 5, AMD 2,
Revision Date 10/2021
UL 1004-1, Rotating Electrical Machines - General Requirements, Edition 2, Revision Date 11/05/2020
UL 1004-3, Thermally Protected Motors, Edition 2, Revision Date 01/31/2018
UL 1004-7, Electronically Protected Motors, Edition 3, Issue Date 06/21/2018
CSA C22.2 No. 100, Motors and Generators, Edition 7, Revision Date 04/2017
CSA C22.2 No. 77, Motors with Inherent Overheating Protection, Edition 8, Revision Date 02/2015
EN/IEC 60034-1, Rotating Electrical Machines - Part 1: Rating and Performance, Edition 14, Issue Date
02/2022
15. Disposing of the product
The crossed-out wheelie bin symbol
on a product means that it must be
disposed of separately from household
waste. When a product marked with
this symbol reaches its end of life, take
it to a collection point designated by
the local waste disposal authorities.
The separate collection and recycling
of such products will help protect the
environment and human health.
17. Document quality feedback
To provide feedback about this document, scan the
QR code using your phone's camera or a QR code
app.
18
Communication
interface module
CIM 300
CIM 500
CIM 110
Installing a communication interface module not listed
above might affect the compliance level of the
product.
14.6 Applicable standards
Click here to submit your feedback