Choosinga Location For Your Lcdtv; To Displayyour Lcdtv Using A Wall Bracket; Removingthe Pedestal Stand - Toshiba 26AV500U Owner's Manual

Choosinga location for your LCDTV
To Display your LCDTV on the included Pedestal
Stand:
Observe the following safety precautions:
I) Read and Follow the pedestal assembly instructions.
CAUTION: BetBre beginning pedestal assembly, carefully
lay the front of the LCD Panel face down on a flat, cushioned
surface such as a quilt or blanket. Leave the bottom of the unit
protruding over the edge of the surfiLce and assemble the pedestal
as indicated below.
Note: Extreme care should always be used when attaching
the pedestal stand to avoid damage to the LCD panel.
2) Place the TV on a sturdy, level surface that can support the
weight of the TV.
3) Be sure to secure the TV to a wall, pillar, surface, or other
immovable structure. (_x>item 20, page 3).
To Displayyour LCDTV using a Wall Bracket:
If you decide to wall mount your LCD TV, always use a UL-
listed wall bracket appropriate for the size and weight of the
LCD TV (_ page 2) :
I) CAUTION: Two people are required for installation.
2) Unplug and remove any cables and/or other component
connectors from the rear of the TV.
3) Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate bracket(s) are
attached to the wall and the back of the TV as described in the
instructions provided with the wall bracket.
4) Remove the screws of the VESA Mounting Pattern show in
the right diagram.
5) After attaching the appropriate bracket(s) to the wall and the
back of the TV. remove the pedestal stand from the TV as
described below.
6) VESA Mounting Pattern
26" 100x200 nm] M4
32"/37"/42" 200x400 nm] M6
(unit in ram)
Removingthe Pedestal Stand
l) Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the stand
protruding over the edge of the surface.
Note: Extreme care should always be used when removing
the pedestal stand to avoid damage to the LCD panel,
2) Remove the screws shown in the right diagram. This will
allow removal of the pedestal stand.
3) Once you have removed all screws holding the pedestal stand
in place, remove the pedestal stand from the TV.
26" TV
Four screws
32 "/37" TV
Four screws
42" TV
Six screws
VESA Mounting Pattern
VESA Mounting Pattern
VESA Mounting Pattern
............. f..i