Syntax OLEVIA LT32HV Series User Manual page 50

publeshooting
and symptoms.
Power On failed
No picture or sound
Full of spots or noise on the screen
Poor color display
Image distortion
The image is blue
The image is too bright, and the
image is saturation in the brightest
areas.
Power plug is not securely inserted into the socket.
1.Check LCD TV power status.
2.Check if the terminal is properly connected and the input mode has a
right connection.
3.Check if the cable is well connected between the video source and
the TV.
Check if any interference from automobiles, trains, high-voltage tran
smission lines, neon signs or other potential sources of interference.
Check OSD and adjust in "Picture" function
Check aspect ratio in "Screen" function.
Check the setting of source in the TV and setitin the right type.
1.Check if the contrast setting is too high.
2.The DVD player is set for a high-level output.
The screen shows searching for
signal but no image.
Out of range
Remote control does not work
No sound
Stripes on the screen
1.Check if the signal cable is disconnected
2.Check if the terminal is properly connected and the input mode has a
right connection.
Check if input signal is suitable to the display.
1.Check if the batteries are properly installed.
2.Check if the batteries are out of power.
3.Check both distance and angle from the TV's infrared (IR receiver) to
remote control.
4.Check if any objectis in between remote control and IR receiver.
5.Check if the IR is under strong fluorescent lighting.
1,Check if the display's sound volume is set on "mute" or set to minimum.
2.Check if the headphone is connected.
3.Check if audio cable is properly connected.
4.Check is the speaker wires are both properly connected. .
Check if any interference from the. radiation wave. Any antenna of radio
or cell phone may also cause interference. Keep display away from those
devices.
47
b l
H
|