Connecting To A Vcr - Syntax OLEVIA LT32HV Series User Manual

TV Installation and Connection Guide
Connecting toa VCR
A\ Disconnect all power sources before making any connections.
Use this hookup if you subscribe to a cable TV system that does not
require a cable box.
1.Using A/V cable and S-Video cables, connect the VCR's Audio and S Video
OUT jacks to the TV's Audio and S-Video In jacks.
Rear of TV
VIDEO-1 (0) O00 000
GE:
S-VIDEO S-VIDEO
VIDEO-2
S Video cable
Component? Componenti
®© ©
A/V cable with RCA connector
When Connecting both Video IN and S-Video IN
Note: When you connect video equipment to both the same Video and
S-Video input jacks, display will automatically select S-Video first.
To view Video signal, please disconnect the S-Video jack or turn off the
S-Video signal on the video equipment.
S-Video is strongly recommended for use if your VCR or video
equipment has it. S-Video input has a better quality of picture than a
composite Video signal.
Note: You can also use the Video 2 jacks located on the TV rear, or
Video 3 located on the right side of the display to connect additional
video equipment.
14