Advertisement
CONNECTION
- Make the connections with the amplifier and all the audio system components switched off and
disconnected from the power supply.
- Connect the audio source to the input AUDIO INPUT.
- The IR extender can be connected to the IR RECEIVER input.
- Check that the general volume control is at its minimum.
- Connect the loudspeakers to the low impedance outputs in a series/parallel circuit so that the charge
impedance of the loudspeakers is the same as the impedance of the amplifier output and that the power
supplied by the amplifier does not exceed that withstood by the loudspeakers.
- Once the connections have been made according to your needs, connect the devices to the power supply
and switch them on. After use, do not forget to disconnect the device from the power supply.
TECHNICAL SPECIFICATIONS
CHARACTERISTICS
POWER
PROTECTION
RESPONSE
DISTORTION
INPUTS
OUTPUTS
CONTROLS
INDICATORS
POWER SUPPLY
DIMENSIONS
ACCESSORIES
WA-2151RC STEREO AMPLIFIER
WA-2151RC
Compact stereo amplifier class D.
Steel box for surface assembly.
Remote control.
Volume control with motorized potentiometer.
Stereo loudspeaker output.
2 x 15 W RMS at 4 Ω
Short circuit and temperature
20-20,000 Hz
Harmonic: 0.06% at 1 kHz
1 aux line, 2 x RCA
4-8 Ω loudspeakers, euroblock
Standby and general volume
LED power, standby, volume level, mute and IR indicators
12 V DC, 2 A with adapter included
145 x 41 x 97 mm depth
Extension cable with remote control
- 5 -
CD
EN
Advertisement
