Download Print this page
OSP furniture DESIGNlab KIL55 Assembly Instructions Manual

OSP furniture DESIGNlab KIL55 Assembly Instructions Manual

Electric lift gaming desk

Advertisement

Quick Links

FCC INSTRUCTIONS
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
OSP FURNITURE LIMITED PRODUCT WARRANTY
Design Lab Products
• 3 years on gaming desks and chairs
• Upholstery is not warranted against routine scratching and scuffing
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or less.
This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event
beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential
damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two year warranty on
all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty will be paid by
Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts.department@officestar.net by Fax 1-909-930-5629, or
toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 3:30 p.m. Pacific Time.
KIL55
ELECTRIC LIFT GAMING DESK
ASSEMBLY INSTRUCTIONS
WARNING
1.
Do not use this product unless all bolts, screws and knobs are
securely tightened.
2.
Check that all bolts, screws and knobs are tight every three
months or as needed.
3.
Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
4.
Do not use product as stepladder.
5.
Use product for its intended purpose only.
6.
Use mild detergent only for cleaning.
© Office Star Products October 2023

Advertisement

loading
Need help?

Need help?

Do you have a question about the DESIGNlab KIL55 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for OSP furniture DESIGNlab KIL55

  • Page 1 Do not use product as stepladder. Use product for its intended purpose only. Use mild detergent only for cleaning. OSP FURNITURE LIMITED PRODUCT WARRANTY Design Lab Products • 3 years on gaming desks and chairs • Upholstery is not warranted against routine scratching and scuffing *All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs.
  • Page 2: Hardware List

    HARDWARE LIST PARTS DRAWING DESCRIPTION SIZE QUANTITY Machine Screw 3/4” 8 PCS + 1 Extra Machine Screw 1/2” 16 PCS + 2 Extra Desk Top (1 PC) Frame (1 PC) Allen Wrench 1 PC 2” Machine Screw 3 PCS Controller 1 PC Left Support (1 PC) Right Support (1 PC)
  • Page 3 KIL55 KIL55 ELECTRIC LIFT GAMING DESK ELECTRIC LIFT GAMING DESK ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 1 STEP 3 STEP 4 STEP 2 Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities. STEP 3 Place Desk Top (1) upside down on a soft, non marring surface. Carefully place assembled Frame (2) onto Desk Top (1) and align mounting holes. IMPORTANT: ASSEMBLE DESK ON A SOFT, NON MARRING SURFACE.
  • Page 4 KIL55 KIL55 ELECTRIC LIFT GAMING DESK ELECTRIC LIFT GAMING DESK ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 5 STEP 6 Tighten Strap Power Strip (not included) Run Cable Through Strap Remove Film Tighten Screws (optional) Power Cord STEP 7 Power Cord Motor Cable Interface STEP 6 Adjust levelers if needed to level desk.
  • Page 5 KIL55 KIL55 ELECTRIC LIFT GAMING DESK ELECTRIC LIFT GAMING DESK HANDEST FUNCTIONS FAULTS & ERRORS HANDSET IINSTRUCTION This list is used for checking and solving common faults and errors. The LED displays an error code with warning sound when problem occurs.
  • Page 6 KIL55 KIL55 Attention ELECTRIC LIFT GAMING DESK ELECTRIC LIFT GAMING DESK BLUETOOTH LED-RGB INSTRUCTIONS ATTENTION ·Power supply: AC120V ± 10%, frequency 60HZ; BLUETOOTH LED-RGB INSTRUCTIONS ·Working environment: 32º - 1 0 4º F ; ·Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to wipe away the surface dust.