OSP furniture DESIGNlab LDT5454GLD Assembly Instructions Manual

OSP furniture DESIGNlab LDT5454GLD Assembly Instructions Manual

Loadout l-shaped gaming desk

Advertisement

Quick Links

IMPORTANT-PLEASE KEEP THESE INSTRUCTIONS IN CASE OF ANY CUSTOMER SERVICE ISSUES
Model Number: JN02-03-22k
LOADOUT L-SHAPED GAMING DESK
IMPORTANT-PLEASE KEEP THESE INSTRUCTIONS IN CASE OF ANY CUSTOMER SERVICE ISSUES

OSP FURNITURE LIMITED PRODUCT WARRANTY

Design Lab Products
• 3 years on gaming desks and chairs
• Upholstery is not warranted against routine scratching and scuffing
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
LDT5454GLD (SF)
ASSEMBLY INSTRUCTIONS

WARNING

1.
Use this product only one person at a time.
2.
Do not use this product unless all bolts screws and knobs are
securely tightened.
3.
Check that all bolts screws and knobs are tight every three
months or as needed.
4.
Do not overturn back tilt knob when decreasing tension.
5.
Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
6.
Do not use product as a stepladder.
7.
Use this product for its intended purpose only.
8.
Use mild detergent only for cleaning.
© Office Star Products September 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DESIGNlab LDT5454GLD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for OSP furniture DESIGNlab LDT5454GLD

  • Page 1 It may cause suffocation. Do not use product as a stepladder. Use this product for its intended purpose only. Use mild detergent only for cleaning. OSP FURNITURE LIMITED PRODUCT WARRANTY Design Lab Products • 3 years on gaming desks and chairs • Upholstery is not warranted against routine scratching and scuffing *All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or less.
  • Page 2 HARDWARE LIST CAM LOCK INSTALLATION DRAWING DESCRIPTION SIZE QUANTITY Glue Ø 1 PC Wooden Dowel Ø 8 PCS Cam Screw Ø 17 PCS Screw Cam Screw in. Fully Tighten. Ø Cam Nut 17 PCS Allen Wrench Ø 1 PC Allen Bolt 6 x 12 x 10mm 15 PCS Allen Bolt...
  • Page 3 PART PARTS (3) Left Desktop (1 PC) (4) Right Desktop (1 PC) (15) Power Outlet (1 PC) (16) Remote Control (1 PC) (5) Left Side Frame (1 PC) (6) Right Side Frame (1 PC) (17) Middle Upper Frame (1 PC) (18) Rear Leg (1 PC) (7) Left Back Panel (1 PC) (8) Right Back Panel (1 PC)
  • Page 4 LDT5454GLD (SF) LDT5454GLD (SF) LOADOUT L-SHAPED GAMING DESK LOADOUT L-SHAPED GAMING DESK ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 3 STEP 1 STEP 2 STEP 4 Remove all the parts from carton, separate them into part numbers indicated on the list and make sure part quantities are correct. STEP 1 Screw in six Cam Screws (C) into Left Desktop (3), three Cam Screws (C) into Right Desktop (4) and two Cam Screws (C) into both STEP 3 Attach Left Side Frame (5) and Rear Leg (18) to Left Back Panel (7) and secure using four Cam Nuts (D).
  • Page 5 LDT5454GLD (SF) LDT5454GLD (SF) LOADOUT L-SHAPED GAMING DESK LOADOUT L-SHAPED GAMING DESK ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 5 STEP 7 STEP 8 STEP 6 STEP 7 Secure Right Front Crossbar (22) between Right Side Frame (9) and Left Front Crossbar (21) using two Allen Bolts (F) and one Allen Bolt (H). STEP 5 Secure top end of Rear Frames (9) to Left Back Panel (7) and Right Back Panel (8) using two Allen Bolts (G) for each Rear Frame (9).
  • Page 6 LDT5454GLD (SF) LDT5454GLD (SF) LOADOUT L-SHAPED GAMING DESK LOADOUT L-SHAPED GAMING DESK ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 11 STEP 9 1st Postion 2nd Postion 3rd Postion NOTE: There are THREE different positions for the Add-On Shelves as show in Figure 1. Please decide your preferred height at this time STEP 10 STEP 9 Attach Right Desktop (4) to assembly and secure to Left Back Panel (7) using three Cam Nuts (D).
  • Page 7 LDT5454GLD (SF) LDT5454GLD (SF) LOADOUT L-SHAPED GAMING DESKSK LOADOUT L-SHAPED GAMING DESK ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 12 STEP 14 STEP 15 STEP 13 STEP 12 Secure Left Upper Crossbar (23) between Left Upper Frame (10) and MIddle Upper Frame (17) using two Allen Bolts (F). FULLY TIGHTEN ALLEN BOLTS (F).
  • Page 8 QUICK SAFETY WARNINGS - PLEASE READ FIRST SLOW DIY 1 DIY 2 DIY 3 AUTO DIY 4 DIY 5 DIY 6 FLASH JUMP3 JUMP7 FADE3 FADE7...

This manual is also suitable for:

Designlab ldt5454gldsf

Table of Contents