*All warranties are limited to the original purchaser for normal usage. This warranty will not cover labor, freight or damage from misuse, abuse, negligence,
damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components covered by
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing.
Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
JEF2418VF
2-DRAWER VERTICAL FILE
ASSEMBLY INSTRUCTIONS
WARNING
1. Do not use unless all bolts, screws and knobs are
2. Check that all bolts, screws and knobs are tight every three
3. Dispose of packing material properly. Do not use plastic cover
Page 1
JEF2418VF 2-DRAWER VERTICAL FILE ASSEMBLY INSTRUCTIONS WARNING 1. Do not use unless all bolts, screws and knobs are securely tightened. 2. Check that all bolts, screws and knobs are tight every three months or as needed. 3. Dispose of packing material properly. Do not use plastic cover as head covering.
Page 2
DRAWING Lock Dowel Fastener 16 PCS Handle 2 PCS Screw Truss Head M4 X 12 4 PCS Metal Rod 4 PCS 2 SETS Metal Runner 14” M4 X 12 24 PCS Screw Leg Stud 4 PCS 3.5 X 12 1 PC Screw Pan Head Screw 1 PC...
Page 3
(1) Side Panel Left (1 PC) (2) Side Panel Right (1 PC) (4) Bottom Panel (1 PC) (3) Top Panel (1 PC) (5) Base Panel (1 PC) (6) Back Panel (1 PC) (7) Drawer Front Panel (2 PCS) (8) Drawer Side Panel Left (2 PCS) (10) Drawer Back Panel (2 PCS) (9) Drawer Side Panel Right (2 PCS) (11) Drawer Base Panel (2 PCS)
Page 4
JEF2418VF 2-DRAWER VERTICAL FILE ASSEMBLY INSTRUCTIONS CAUTION: THIS ITEM IS MADE OF LAMINATED PARTICLE BOARD AND MEDIUM DENSITY FIBRE BOARD TO BE ASSEMBLED ON A DRY, SOFT, SMOOTH AND CLEAN SURFACE. DO NOT USE DETERGENT OR CHEMICALS. AVOID DAMP AREAS AND DIRECT SUNLIGHT.
Page 5
JEF2418VF 2-DRAWER VERTICAL FILE ASSEMBLY INSTRUCTIONS STEP 5 STEP 6 DETAIL A METAL ROD SCREW M4 X 12 SCREW TRUSS DETAIL A HEAD M4 X 12 (X 2) (X 2) HOLE HANDLE METAL RUNNER DETAIL A DETAIL A STEP 7...
Page 7
JEF2418VF 2-DRAWER VERTICAL FILE ASSEMBLY INSTRUCTIONS STEP 13 STEP 14 STUD DETAIL A DETAIL A STEP 15 STEP 16 DETAIL A SAFETY STRAP SCREW PAN HEAD 3.5 X 12 DETAIL A WALL PLUG SCREW #6 X 1 1/2”...
Need help?
Do you have a question about the JEF2418VF and is the answer not in the manual?
Questions and answers