Table of Contents
Advertisement
Check the texture of ice cubes just released. Right size must have a small depression (about 5-6
G .
mm) in their crown.If not, wait for the second defrost/harv before performing any adjustment.
If required on model UCG 45/65/85/105, the length of the freezing cycle can be modified by
H .
turning the knob of the cube size control or evaporator thermostat located in front of the
machine until the desired size is achieved.
if the temperature
of the room in which
the machine is place
is below 20°C, the
cubes will tend to be
partly hollowed out
(see fig. on right).
If, on the other
hand,
the
room
temperature
is
above
30°C
the
cubes produced will
have a jagged rim of
ice
around
the
crown.
UCG GOURMET SERIES UNDERCOUNTER
pg. 8
Advertisement
Table of Contents
