Table of Contents
Advertisement
en Assist
Category
Foods
Preserving,
Preserving food
extracting
Extracting juice
juice, steril-
Bottles, sterilise
ising
Reheating,
Vegetables
crisping up
Menu
Baked items
Side dishes
Defrosting
Fruit, vegetables
food
13.4 Dishes with baking sensor
If you select a dish that is suitable for the baking
sensor, the appliance regulates the baking process
completely automatically.
The baking sensor in the cooking compartment and the
appliance regulates the settings automatically.
The appliance automatically bakes the following dishes
with the baking sensor.
Category
Food/dishes
Cakes,
Cakes
bread
¡ Cakes in tins
¡ Cakes on a baking tray
¡ Pies/tarts
Small baked items
¡ Puff pastry
¡ Muffins
¡ Leavened cake
Savoury cakes, pizza, quiche
¡ Savoury cakes, quiche
¡ Pizza
¡ Tarte flambée
Frozen
Potato products
products
¡ Potato products
Suitable baking tins
For an optimal baking result, use dark-coloured metal
baking tins.
ATTENTION!
Using silicone moulds or any film, covers or accessor-
ies that contain silicone could damage the baking
sensor. Damage may occur even if the baking sensor
is not active.
Do not use silicone moulds or any film, covers or
▶
accessories that contain silicone.
Never place objects made of silicone in the cooking
▶
compartment.
Forecast for the duration of the operation
If your appliance is connected to Home Connect, the
appliance can forecast the expected duration of the
baking or roasting process.
The initial forecast appears in the display after ap-
prox. 1 minute. The forecast is continually recalculated
and updated.
22
13.5 Adjusting the dish
Your appliance offers you a wide range of different
dishes. You can use the control ring to scroll through
the various selection lists.
Note: Once it has started, you can no longer change or
interrupt the dish and the settings.
Requirement: To start the operation, the cooking com-
partment must be cooled down.
Press
.
1.
Press "Assist".
2.
Press the required category.
3.
Press the required food.
4.
Press the required meal.
5.
a The settings for the dish appear in the display.
a For dishes with baking sensor operation, no settings
appear; a notification appears on the baking sensor.
Adjust the settings, if required.
6.
For some dishes, you can adjust the temperature
‒
and the cooking time, and for some dishes you
can adjust the weight instead. In baking sensor
mode, the appliance controls the settings auto-
matically.
For some dishes, you can also delay the end
‒
time.
→ "Setting the end time", Page 15
In order to get information about the accessory and
7.
shelf position, press "Tip".
Press to start.
8.
Note: During operation with the baking sensor, do
not open the appliance door. The baking result
would no longer be correct and the baking sensor
mode is terminated.
a The appliance starts to heat and the cooking time
counts down.
a No cooking time is displayed in baking sensor
mode. The time in the display shows how long the
programme has already been running.
a If your appliance is connected to Home Connect,
the forecast cooking time is displayed in baking
sensor mode.
→ "Forecast for the duration of the operation",
Page 22
a Once the dish is ready, a signal sounds. The appli-
ance stops heating.
When the cooking time has elapsed:
9.
To stop the signal early, press any touch field.
‒
For some dishes, you can continue cooking if ne-
‒
cessary.
→ "Adding extra cooking time", Page 22
When the dish is ready, press
‒
pliance off.
Adding extra cooking time
For some dishes, the appliance offers the option to add
extra cooking time once the cooking time has elapsed.
You can do this as often as required.
If you do not want to continue cooking, press "End"
1.
and switch off the appliance using
To continue cooking the dish, press "Continue cook-
2.
ing".
a A cooking time appears in the display.
Use the control ring to change the cooking time, if
3.
required.
Press to start.
4.
to switch the ap-
.
Advertisement
Table of Contents
