Table of Contents
Advertisement
7. Operation
7.1. Channel selection
To select a channel, press either one of the
multifunction switch on the device or select the channel directly using the number buttons.
For a two- or three-figure number, press the number buttons in the corresponding order.
By pressing the
button on the remote control, you can call up the channel list, select the
O K
channel using the and buttons and call it up by pressing
7.2. Sound settings
You can increase or decrease the volume by pressing the volume buttons
control or in speaker mode of the multifunction switch MODE on the device.
Press the mute button
Pressing the
L A N G .
7.3. Screen settings
Depending on the programme, the pictures are transmitted in the formats 4:3 or 16:9. As soon as
menu is selected using the buttons, three direct links appear above it. Here you
the
PICTURE
can navigate directly to the aspect ratio settings and adjust the screen format:
: The format displayed is automatically adjusted to match the input signal.
AUTO
: (Only in HDMI mode and with HD TV channels
FULL
received via cable and satellite): Pixel-perfect reproduc-
tion of the image (1:1).
: For undistorted picture display in 16:9 format
16:9
: This function is used to zoom a widescreen
SUBTITLE
image (picture format 16:9) with subtitles to full screen
size.
: This option sets the 14:9 picture format.
14:9
: This function is used to zoom a widescreen
14:9 ZOOM
image (picture format 14:9) to the upper and lower ed-
ges of the screen.
: Is used to view a standard image (picture ratio of
4:3
4:3) as this is its original format.
: This function is used to zoom a widescreen
CINEMA
image (picture format 16:9) to full screen size.
You can also change the picture format in the menu
.
TURE ZOOM
P
to switch the volume fully off and on again.
button opens the
CURRENT LANGUAGE
buttons on the remote control, use the MODE
/
.
O K
window.
SUBTITLE
SETTINGS > PICTURE > ADVANCED SETTINGS > PIC
on the remote
V / +
SUBTITLE
25
EN
Advertisement
Table of Contents
