Table of Contents
Advertisement
62. Remove three screws and the main
motor from the rear frame.
63. Remove five screws and the drive unit
from the rear frame.
64. Check or replace the drive unit and refit
all the removed parts.
*: When refitting the rear frame, depress the
lift plate not to hit the cam.
Moreover, combine the MP driving shaft
and the positioning axis of a drive unit.
Drive unit
Rear frame
Figure 1-5-128
MP driving shaft
Positioning
axis
Cam
Lift plate
Figure 1-5-129
1-5-73
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Main motor
Screws
Screw
Screw
Screws
Rear frame
Advertisement
Table of Contents
