Nektar Impact LX Mini Owner's Manual page 5

17
18
:
13. Pots (eight)
Functionality changes according to the mode
selected. When Arp/Repeat [Function] is selected, Arp/Repeat
parameters are controlled according to the screen printing.
When [Internal] is selected, the pots send their assigned MIDI
messages. [Instrument] is mainly used to control plugin
instruments via Nektar DAW Integration software.
:
14. [Page] button
With [Internal] mode active, [Page] toggles
the MIDI assignments for the 8 pots. The blue and white LEDs
indicate the current selection. It works similarly in most cases
when [Instrument] mode is selected with Nektar DAW
integration running.
:
15. Pads
The velocity sensitive pads can be programmed to send
MIDI Note, CC and Program messages. Read more about pads
on page 12.
www.nektartech.com
Impact LX Mini Overview
16
15
19
16. [Clips] and [Scenes] buttons
[Function] is selected, the buttons are used to disable the
repeat function for either keyboard or pads, as indicated by
the screen printing. The buttons are otherwise used for Nektar
DAW Integration, if supported by the DAW.
17. Power [On/Off] switch
18. USB connector
to the socket and the other end to a USB computer/device.
19. Foot switch socket
switch pedal (not included). The socket controls sustain by
default and polarity is automatically detected on power up.
Connect the included 1/8" to 1/4" adaptor cable for use with a
1/4" jack foot switch.
Nektar Impact LX Mini owner's manual 5
:
When Arp/Repeat
:
Switch power to the unit on/off.
:
Connect the included USB micro-B cable
:
1/8" TRS jack for connecting a foot