Setup Mode - Nektar Impact LX Mini Owner's Manual

Setup mode gives access to additional functions such as selecting Part 2 button options, control assign, selecting velocity curves and more.
To enter the menu, press the [Shift]+[Internal] buttons. [Internal] blinks while Setup mode is active and the keyboard's MIDI output is
deactivated so it can be used to select menus instead.
All settings are stored immediately and retained over power cycling.
The screen printing above the keys shows which function or option is selected by each key.
C1
The functions and how they can be used is covered over the following pages. Note that the documentation assumes you have an
understanding of MIDI, including how it works and behaves. If you are not familiar with MIDI, we recommend you study MIDI before
making control assignment changes. The MIDI Manufacturers Association website www.midi.org, is a good place to start.
Cancel
You can cancel any value entry or menu selection by pressing 'Cancel' (C1) as long as you have not already pressed [Enter] (C3).
Assign a MIDI cc message to a control
MIDI cc messages can be assigned to joystick up, joystick down, joystick push button, the 7 transport buttons + its shift status, the large
volume pot, any of the 8 pots in 2 pages (16 total), the foot switch socket and the 8 pads.
All settings are retained when you switch Impact LX Mini off. So the next time you switch the unit on, all settings are recalled as you left
them.
Here is how you assign a MIDI cc message to a control:
• Press [Shift]+[Internal] to activate Setup mode. The [Internal] button blinks while Setup is active.
• Press C#1 on the keyboard to select #cc Assign.
• Move or press a control to select it for assignment.
• Enter a MIDI CC value between 0-127, using the black number keys labelled 0-9.
• Press [Enter] (C3) to accept the change and exit Setup.
www.nektartech.com
C2
Nektar Impact LX Mini owner's manual 15

Setup mode