Table of Contents
Advertisement
(10) Fingerprint sensor cable (ZIF)
(11) Hard drive cable (ZIF)
2.
Remove the two Phillips M2.0 × 2.5 screws (1) that secure the system board to the computer.
3.
Remove the four Phillips M2.0 × 4.0 screws (2) that secure the system board to the computer.
4.
Lift the bracket from atop the USB-Type C port (3).
5.
Remove the RJ-45 cover from the system board (4).
The USB bracket and RJ-45 cover are available in the Bracket Kit as spare part number L44586-001.
6.
Rotate the right side of the system board upward (1).
Component replacement procedures
55
Advertisement
Table of Contents
