Advertisement
Quick Links
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
1
Connect 2.4 GHz Receiver
Connect the 2.4 GHz receiver to
the device USB port.
Switch toggle to 2.4 GHz mode
G / Cable / BT
G = 2.4 GHz
Type-C
Extension Adapter
Cable
For Receiver
2.4 GHz
Receiver
Note: For the best wireless experience, we recommend using the
extension adapter for receiver and putting the 2.4 GHz receiver
somewhere on your desk close to your keyboard for a low rate
of latency and fewer signal interferences.
Quick Start Guide
2
Connect Bluetooth
Switch toggle to Bluetooth
G / Cable / BT
Press fn + 1 (for 4 seconds) and pair with
device named Keychron Q5 Max
fn + 1
Advertisement
Related Manuals for Keychron Q5 Max
Summary of Contents for Keychron Q5 Max
- Page 1 Press fn + 1 (for 4 seconds) and pair with 2.4 GHz Receiver device named Keychron Q5 Max Note: For the best wireless experience, we recommend using the extension adapter for receiver and putting the 2.4 GHz receiver fn + 1 somewhere on your desk close to your keyboard for a low rate of latency and fewer signal interferences.
- Page 2 DFU mode. 5. Flash the firmware with the QMK Toolbox. 6. Factory reset the keyboard by pressing fn + J + Z (for 4 seconds). *Step by step guide can be found on our website. Not Happy support@keychron.com...
Need help?
Do you have a question about the Q5 Max and is the answer not in the manual?
Questions and answers