Related Manuals for Milwaukee M18 FUEL SUPER SAWZALL 2722-20
Summary of Contents for Milwaukee M18 FUEL SUPER SAWZALL 2722-20
- Page 1 OPERATOR'S MANUAL Cat. No. 2722-20 M18 FUEL SUPER SAWZALL RECIPROCATING SAW ™ ® WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL • turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING • Do not overreach. Keep proper footing and tions provided with this power tool. -
Page 3: Specifications
Do not use this tool if you do not understand these Orbit control switch operating instructions or you feel the work is beyond Rafter hook (not shown) your capability; contact Milwaukee Tool or a trained Trigger Speed dial • These carry... - Page 4 ASSEMBLY Quik-Lok Blade Clamp ® Recharge only with the charger WARNING • Point the tool downward, twist the collar, and shake the tool up and down (do not turn the tool on while your Removing/Inserting the Battery To remove the battery, push in the release buttons In most cases, a corner of the broken blade will extend WARNING changing or removing accessories.
-
Page 5: Operation
Always wear proper eye protection marked to comply with ANSI Z87.1. saw needs servicing by an authorized MILWAUKEE When working in dusty situations, wear appro- priate respiratory protection or use an OSHA compliant dust extraction solution. -
Page 6: Maintenance
MILWAUKEE If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on...