Sylvania 6427GFG Owner's Manual page 28

SETTINGS
If you switch wires (e.g. between antenna and
CATV) or if you move the TV to a different area
after the initial setting, you will need to perform
AUTO PRESET CH again. This function lets you
easily select the receivable channels with [OH A/T]
and the TV memorizes them even if you switch
wires.
C3DCD CD
GD G3 (_3
(D CD (D
€_ C:D Q CC)
CD CD C:3 CD
_ _T z _LEP _'
VOL A
4 For TV channels
- Using [CH A/T], select
"AUTO PRESET CH(TV)".
ADD/DELETE
_* AUTO PRESET C H(T'_h,,
AUTO PRESET OH(CAW)
AUTO PRESET CH(TV/[}TV)
AUTO PRESET OH(CAW)
I CATVtake_ approx 50mi_
- Press [VOL A].
Scanning and memorizing the channels auto-
matically starts.
AUTO PRESET CH(TV)
_1_
NOTE:
* Make sure if the TV is connected to antenna or cable.
When aerial antenna is connected, select "AUTO PRE-
SET CH (TV)" or "(TV/DTV)" at step 4. When connected
to CATV, select "AUTO PRESET CH (CATV)".
When scanning TV or CATV only
1 Select analog mode by pressing [DTV/TV].
2 Display the menu screen.
- Press [MENU].
The following menu screen is displayed.
• PICTURE
CHANNEL SET
[ENG_ESP/FRA
V-CHIP SETUP
CAPTION [OFF]
,,When the scanning and memorizing are com-
pleted, the memorized smallest channel in the
analog broadcasting will be displayed.
4 For CATV channels
,, Using [CN A/T], select "AUTO PRESET
CH(CATV)".
ADD/DELETE
AUTO PRESET CH(TV)
_- AUTO PRESET CH(CA% z)
AUTO PRESET CH(TV/[}TV)
AUTO PRESET CH(CAW)
I CATVtakes approx 50min
- Press [VOL A].
Scanning and memorizing the channels auto-
matically starts.
3
Select "CHANNEL SET".
,, Using [CH A/T], select "CHANNEL SET".
PICTURE
• CHANNEL SET
[ENG]_ESP/FRA
V-CHIP SETUP
CAPTION [OFF]
AUTO PRESET CH(CATV)
_I_
,,When the scanning and memorizing are com-
pleted, the memorized smallest channel in the
CATV will be displayed.
- Press [VOL A].
EN