Sylvania 6427GFG Owner's Manual page 14

4 Set the AUTO PRESET CH.
NOTES:
. ff "D.S.T (Daylight Saving)" and "TIME ZONE" is not set,
you cannot select "AUTO PRESET CH".
. Make sure if the TV is connected to antenna or cable.
When antenna is connected, select "AUTO PRESET CH
(TV/DTV)" at the procedure below. When connected to
CATV, select "AUTO PRESET CH (CATV)".
Here describes the case for searching and
memorizing channels for TV/DTV.
,, Using [CH A/T], select "AUTO PRESET
CH(TV/DTV)".
1 PLEASE C ONNECT ANTENNA TO
THE UNIT
2 SETUPTHE ITEMS WITH
AVAND¥BUTTONS
DST (Daylight Saving) ION]
TIMEZONE [ALASKA]
• AUTO PRESET CH(TV_DTV)
AUTO PRESET CH(CATV}
,, When you press [VOL A], the channel scanning
in both analog and digital modes will automati-
cally start.
AUTOPRESETCH(TWDTV)
_I_
,, When scanning is completed, the memorized
smallest channel will be displayed.
NOTES:
* The initial AUTO PRESET CH function can be executed for
either TV/DTV or CATV only once. If you want to scan both
TV/DTV and CATV, you need to select "CHANNEL SET" in
the MENU screen to scan and memorize other channels after
initial presetting is completed. (Refer to page 28.)
. You can exit the initial AUTO PRESET menu by pressing
[MENU].
. When you press [MENU] while scanning, the scanning is
interrupted and the memorized smallest channel is dis-
played.
* If you press [POWER], the power will be turned off. When
the scanning is not completed, initial AUTO PRESET CH
screen is displayed every time you turn on the power.
* When no channel can be received by AUTO PRESET CH,
"NO TV SIGNALS" is displayed on the screen.
NO TVSIGNALS
EN