Sylvania 6427GFG Owner's Manual page 16

This section describes how to adjust the volume
when viewing TV. The MUTE function, which is use-
ful when you have a visitor or a phone call, will be
also described.
CD (D CD
GD (D (D
CD CD CD tHe#
CD @ Q CD
o@o_
o VOL A/v
MUTE
1 Using [VOL A/V]
,, You can adjust the audio volume with [VOL A,K7].
,, The volume bar is displayed at the bottom of
the screen when adjusting the volume.
,, Same operation is available with [VOL AFT] on
the front panel of the main unit.
VOLUME
_I_
2
Using [MUTE]
,, Press [MUTE] on the remote control to mute
the sound.
The colored volume bar is displayed on the
screen while muting.
This section describes how to switch the audio in
the analog mode and how to switch the audio lan-
guage in the digital mode.
_ AUDIO
,;!71
1 Switch the audio.
,, Every time you press [AUDIO], the audio will
be switched as below.
_N N]
P]
o]
MAIN : Outputs main-audio
SAP : Outputs second audio channel
MONO : Outputs mono-audio
1 Switch the audio language.
,, When you press [AUDIO], the currently selected
language and the number of received languages
will be displayed on the screen.
Audio
VOLUME
IIIIIIIIIIIIIIII
,, To release the MUTE status, press [MUTE]
again or press [VOL AFZ].
" Every time you press [AUDIO], the language
will be switched.
* Languages you can switch differ depending
on the receiving broadcast.
NOTE:
will not
Even if you press [AUDIO] in external input, the audio
be switched.
EN