Tracer MobiDrive User Manual page 11

User Manual
BASIC DASHCAM OPERATIONS
Adjusting the lens position
The holder can rotate the recorder 360° to best adjust its position and ensure the
best recording.
Switching the device on and off
NOTE: The dashcam should be connected to a continuous power supply in
the vehicle during operation using the included power supply. The built-in
battery keeps settings and recordings in the case of unforeseen traffic events,
but it does not provide enough power for the recorder to work (record videos).
1. Manual on: Short press the [Power] button to turn on the device. Long press the
[Power] button to turn off the dashcam.
2. Automatic on: Connect the device to the auxiliary power outlet in your car. The
device is turned on automatically when the engine is started and starts recor-
ding.
Switching modes
The device has three modes: recorder, picture, and playback. Modes are changed
with the [Mode] button.
Settings menu
In the recorder or picture mode, short press the lock button to enter the settings
menu (blue background). Use the up/down buttons to scroll through the list of
items. Press [OK] to confirm the setting and press the lock button to exit the menu.
MobiDrive
Car camera
EN
11