Pin Codes; Puk Codes; Barring Password; My Own Key - Nokia 6110 User Manual

Y o u r p h o n e
If you enter an incorrect lock code five times in succession,
the device ignores further entries of the code. Wait for 5
minutes, and enter the code again.
When the device or keypad is locked, calls may be possible
to the official emergency number programmed into your
device.

PIN codes

The personal identification number (PIN) code and the
universal personal identification number (UPIN) code (4 to
8 digits) help to protect your SIM card against
unauthorized use. See "Security", p. 77. The PIN code is
usually supplied with the SIM card.
The PIN2 code (4 to 8 digits) may be supplied with the SIM
card and is required for some functions.
The module PIN is required to access the information in the
security module. The module PIN is supplied with the SIM
card if the SIM card has a security module in it.
The signing PIN is required for the digital signature. The
signing PIN is supplied with the SIM card if the SIM card
has a security module in it.

PUK codes

The personal unblocking key (PUK) code and the universal
personal unblocking key (UPUK) code (8 digits) are required
22
Copyright © 2008 Nokia. All rights reserved.
to change a blocked PIN code and UPIN code, respectively.
The PUK2 code is required to change a blocked PIN2 code.
If the codes are not supplied with the SIM card, contact
your local service provider for the codes.

Barring password

The barring password (4 digits) is required when using
barring. See "Call barring", p. 81. You can obtain the
password from your service provider.
If you enter an incorrect barring password three times in
succession, the password is blocked. Contact your service
provider.

My own key

To configure the my own key to open applications such as
the message reader when pressing the key, select
Settings > Phone sett. >
own key, scroll to the desired application, and select it.
To give voice commands, press and hold the my own key.
To activate push to talk, press the my own key. The push to
talk connection must be started before it can be activated
with the my own key. See
Menu
General > My own key >
"Push to talk", p. 91.
Call
>
My