Disassembly Of Front Panel Unit - Panasonic SA-AK350E Service Manual

SA-AK350E / SA-AK350EB / SA-AK350EG
Step 3 Remove up the heat sink sub assembly (with
IC5501).
Step 4 Remove screw and IC clip.
Step 5 Remove IC5501 from the sub assembly.

10.10. Disassembly of Front Panel Unit

· Follow the (Step 1) - (Step 5) of Item 10.4
· Follow the (Step 1) - (Step 4) of Item 10.5
Step 1 Detach FFC cables at connectors (CN2803 & CN2806)
on Main P.C.B..
Step 2 Detach cable at connector (CN5951) on Transformer
P.C.B..
Step 3 Bent the front panel unit slightly forward as arrow
shown.
Caution: During assembly of the heat sink sub assembly
(with IC5501) all soldering points is touch-up to avoid dry-
joints.
Step 4 Release 2 claws outwards.
Step 5 Remove the front panel unit.
Note: Ensure 2 claws located at the bottom chassis is seated
into the 2 slots at bottom of front panel at 2 catches (one on
each side) of bottom chassis to be aligned to front panel's slot.
Assembly is secured upon hearing clicking sound.
32