Hitachi TRK-W545W.HW Instruction Manual page 13

IM] DUBBING (TAPE [1] > TAPE [2))
Dubbing (tape-to-tape recording) is to play back one tape and record its content onto another tape. This
unit employs the double cassette system, so the content of TAPE being played back, can be recorded
directly onto TAPE [2].
@ (cS Insert the tape to be played back into TAPE [1] and the tape to be recorded into TAPE [2].
© is Select the DUBBING SPEED selector position.
¢ To dub a tape at the normal speed, set the DUBBING SPEED selector to NORMAL.
¢ To dub a tape at double the normal speed, set the DUBBING SPEED selector to HIGH.
@ (> Press the STOP/EJECT buttons of TAPE [1] and [2] to stop dubbing.
:
| Note: Do not change over the DUBBING SPEED selector during recording.
This equipment should not be used for taking copies of tapes in breach of copyright. Copyright sub-
sists in most pre-recorded tapes.
| ESE eee
CD PLAYER
[| TO LISTEN TO A COMPACT DISC
@ .@& Connect the output sockets of the CD player and the CD/LINE IN sockets of this unit with a
US pin lead.
© (> Operate the CD player for playing back.
RECORDING FROM A CD PLAYER
Recording cassette tapes is possible while playing a CD.
1. Insert the tape into TAPE [2].
2. Follow steps @ to @ shown in "TO LISTEN TO A COMPACT DISC". Pressing RECORD button and
PLAYBACK button simultaneously will start recording.
|O| ERASING (TAPE [2))
When a recording is being made, any sound on the track is automatically erased before the new recording
is made.
if you wish to erase a recorded tape, without making a new recording, follow steps @ — @ as in the diagram.
Note: Disconnect external programme source before erasing starts.
"