Installation; General Conditions; Scope Of Delivery: Check Unit For Comple; Teness And Transport Damages (Intactness) - BWT AQA total 1500 Fitting And Operating Instructions

Caution: If pressure surges from neighbouring
pipe systems that exceed the actual test pressure of
the unit cannot be excluded, a suitable water sur-
ge damper must be installed to protect the unit in
compliance with applicable national standards and
regulations.

5. Installation

5.1. General conditions

The system must be installed, in compliance with the-
se installation and operating instructions by a water
supply company or by an installation company listed
by a water supply company (comply with applicable
national requirements in other countries).
Caution: Working on the electrical system can
endanger life. The unit must be disconnected from the
mains before any work is carried out on the system.
Always comply with the national legal requirements for
the connection of and work on the electrical system.
Transportation and storage
Please ensure that, during transport and storage, the
unit is protected against strong shocks, impacts and
frost.

5.2. Scope of delivery: Check unit for comple-

teness and transport damages (intactness)

a.) Scope of delivery AQA total 1500

Wall unit, ready to plug in, complete with:
- Connection module in high-quality cast brass
with integrated backflow preventer, flow sensor
and screwed-on control unit with mains
connection
- 1 screw connector DN 25 (1" external thread)
and 1 screwed element DN 25 (1" external the
read)
- Various fastening materials for wall mounting
- Unit cladding
- Installation and operating instructions
- 1 working unit with HydroMODUL rapid
connection system and transport cap,
incl. AQA total refill
- Hexagon socket screw wrench

b.) Scope of delivery AQA total 2500

Standing unit, ready to plug in, complete with:
- Standard unit, incl. stand based and unit
cladding, connection enclosure with backflow
preventer and flow sensor
- 1 cabled electronic control unit, integrated in the
unit
- 1 working unit with HydroMODUL rapid conneti
on system and transport cap, incl. AQA
total refill
- 2 flexible reinforced hoses DN 25
- Installation and operating instructions
- 1 assembly wrench
Tip: For simple installation use the optionally availab-
le multiblock for AQA total 2500 on a connection
module (3/4", 1" or 1 1/4") or preferably on a
HydroMODUL distributor. This significantly facilita-
tes the operation and maintenance of the AQA total
unit.

c.) Scope of delivery AQA total 4500

Wall unit, ready to plug in, complete with:
- Connection elements in high-quality cast brass
with integrated backflow preventer, flow sensor
and screwed-on control unit with mains connection
- 2 mounted screwed elements DN 40 (1 1/2"
external thread)
- Various fastening materials for wall mounting
- Unit cladding
- Installation and operating instructions
- 2 working units with HydroMODUL rapid
connection system and transport cap,
incl. AQA total refill
- Hexagon socket screw wrench
GB
19