Advertisement
Option 2: Setting the Clock Antomaticaltv
The Clock can be set automatically
if you are receiving a digital signal.
1.
Press the MENU button to display the menu.
Press the .A or T button to select "Setup", then press the ENTER button.
Press the .A or _' button to select "Time", then press the ENTER button.
2.
Press the ENTER button to select "Clock".
3,
Press the ENTER button to select "Clock Mode".
Press the .A or _' button to select "Auto", then press the ENTER button.
4.
Press the .A or Y button to select "Time Zone", then press the ENTER button.
5,
Press the A or Y button to highlight the time zone for your local area
(and to move the highlight to the appropriate time zone on the map of the
United States), then press the ENTER button.
6,
Press the .A or Y button to select
"DST"
(Daylight
Saving
Time), then
press the
ENTER
button.
Press the .A or V button to select
"On" or "Off', then
press the ENTER
button.
Press the EXIT
button
to exit.
Depending on the broadcast station and signal, the auto time may not be set correctly.
If this occults, set the time manually.
Antenna or cable must be connected in order to set the time automatically.
English
45
Advertisement
