Download Print this page

Samsung SP-S4243 Owner's Instructions Manual page 10

Hide thumbs Also See for SP-S4243:

Advertisement

Connecting Cable
TV
To connect to a cable TV system, follow the instructions below.
Cable *_itbout a Cable Box
1,
Plug the incoming cable into the ANT 1 IN (CABLE) terminal on the back of the TV.
BecausethisTV is cable-ready, y oudo not needa cablebox to viewunscrambled cablechannels.
Connecting
to a Cable
Box that Descrambles
All Channels
ANT
IN
ANT OUQt_}=
t,
Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled"ANT OUT", "VHFOUT" or simply,"OUT".
2,
Connect the other end of this cable to the ANT 1 IN (CABLE) terminal on the back of the TV.
Cnnnectinu
to a Cable
Box that Descrambles
Some Channels
if your cable box descrambles only some channels (such as premium channels), follow the instructions below. You wilt need a two-way
splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)
:o+T
1,
Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
This terminal might be labeled"ANT IN",
"VHF IN"or simply, "IN".
_T@
""* [_
Incoming
cable
SpIRter
Incoming
cable
Splitter
Cable
Box
2,
Connect this cable to a two-way splitter.
3.
Connect an Antenna cable between an
OUTPUT terminal on the splitter and the
IN terminal on the cable box.
Incoming
cable
Splitter
Cable
Box
4,
Switch
Connect an Antenna cable between the
ANT OUT terminal on the cable box and
the B-IN terminal on the RF(A/B) switch.
Incoming
cable
m
Cable
Box
RF (AIB)
Switch
5,
Connect another cable between the other
OUT terminal on the splitter and the A-IN
terminal on the RF (A/B) switch.
6,
Connect the last Antenna cable between the
OUT terminal on the RF (A/B) switch and
the ANT 1 IN (CABLE) terminal on the rear
of the TV.
Switch
After you have made Ibis connection, set the A/B switch to the %" position for normal viewing. Set the A/B switch to the "B" position to view scrambled
channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel, which is usually channel 3 or 4.)
English l(t

Advertisement

loading