Advertisement
Operation
Turning the TV On and Off
Press the POWER button on the mmole control.
You can also use the POWER button on the TV.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
1.
Press the POWER button on the remote control.
The message "Menu language, Channels and Time will be set," is displayed,
Press the ENTER button, then "Select the language of the OSD" menu is
automatically displayed,
2.
Press the ENTER button to enter the language,
Press the • or • button to select language, then press the ENTER button,
"Select the antennas to memorize," menu is automatically displayed,
3,
Press
the •
or •
button
to memorize
the channels
of the selected
connection.
Press
the ENTER
button
to select
"Start",
If the antenna is connected to ANT 2 IN (AIR), select "Air" and if it is connected to
ANT 1 IN (CABLE), select "Cable",
If both ANT 2 IN (AIR) and ANT 1 IN (CABLE) are connected, select the 'Air + Cable",
In Cable mode, you can select the correct signal source among STD, HRC, and [RC
by pressing the • or • button, then press the ENTER button,
Contact your local cable company to identify the type of cable system that exists in your
particular area,
Continued,,.
English 15
Advertisement
