Advertisement
5 6
5
_
EZ3 EZ3 _
\ MSU.G
k
J
Setting Up the Remote to Operate Your DVD
1.
Turn off },our DVD.
2.
Press the DVD button on your TV's remote controh
3 _
!!!sEl b.!!oo y ou TY _e,_o_on!_o : . ...................................................................
4.
Using the number buttons on your remote con/ml, enter three digits of the DVD code listed on
page 24 of this manual for >'ourbrand of DVD. Make sure you enter tbree digits of the code,
esen if the first digit is a "0". (if more than one code is listed, try' the first one.)
5.
Press tbe POWER button on tbe remote controL
Your DVD sbould turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the otber codes
listed for your brand of DVD. If no other codes are listed, try eacb code, 000 throu _b 141
Note on Using Remote Control Modes: DVD
Wben your remote control is in "DVD" mode, the ",otume buttons still control your TV's ",olume.
6 6
6
_c_
EZ_
EZD
EZ_ _
\ MSU.
k,
)
Setting/p
the Remote to Operate Yuur Set lbp Bux
1.
Turn off your STB.
2.
Press the SI'B button on your TV's remote control.
3.
Press the SEI' button on yourTV's remote control.
4.
Using the nmnber buttons on your remote control, enter three digits of the STB code listed on
page 23 of this manual for your brand of STB. Make sure you enter three digits of the code, esen
if the first digit is a "0". (if more than one code is listed, try the first one.)
5.
Press the POWER button on the remote control.
Your STB should turn on if your remote is set up con'ectly.
if your STB does not turn on after set-up, repeat steps 2,3 and 4, but try one of the other codes
listed tor your brand of STB. if no other codes are listed, try each code, 000 through 074.
Note on Using Remote Contmt Modes: STB
When your remote control is in "STB" mode, the volume buttons still control your TV's volume.
English 21
Advertisement
