Panasonic OmniVision PV-V4611 Operating Instructions Manual page 30

Copying Your Tapes (Dubbing)
Connection
VCR
VCR
(HiFi) OUTTO TV
VIDEON? © L-AUDIÓ IN2-R
Front of VCR O O O
(Video In Terminal on the
front of VCR is available)
@ Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on Recording VCR.
To monitor the dubbing, also connect a TV as shown.
Connect "L" and "R" AUDIO OUT terminais on Playing VCR to "L" and "R" AUDIO IN
terminals on Recording VCR (Rear).
In place of a Playing VCR, you can use other equipment, such as a Camcoder.
Simply connect the unit's Audio/Video outputs to the Recording VCR.
Playing (Source) VCR Recording (Editing) VCR
1 Insert pre-recorded tape. Insert blank tape with record tab.
2 Press INPUT to set VCR Input mode to LINE1 for
Video Input (Rear) or to LINE2 for Video Input
(Front). (See "Selecting the Input Mode" below.)
Press PLAY, then PAUSE/SLOW Press REC, then PAUSE/SLOW
3 immediately to enter PLAY/PAUSE mode. immediately to enter REC/PAUSE mode.
The operation of steps 4 and 5 must be done on both
playing and recording VCRs at the same time.
Press PLAY to start dubbing. Press PAUSE/SLOW to start dubbing.
Playing VCR starts playback. Recording VCR starts recording.
5 Press STOP to stop dubbing. Press STOP to stop dubbing.
E To Monitor Dubbing on Your TV W Selecting the Input Mode
1 Turn your TV on and tune to the Recording Method1: Press INPUT repeatedly.
VCR channel (CH3 or CH4). Channel Number <--> LINE1 <--> LINE2
Method2: Press CH &/ Y. Display will change as betow.
2 Set the VCR/ TV Selector on the Recording
VCR to "VCR." aseos
(CABLE) (TV)
UNE24— LINE 14—125 or 69
QM) Putin tapes protected with Copy tuard wili ° ann Pra did TE Ce cio ARO
have r qual; ; :
poor a results * LINE1: For rear audio/video connection.
LINE2: For front audio/video connection.
Caution: Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com