Panasonic OmniVision PV-V4611 Operating Instructions Manual page 11

j "Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
Confirm the output channel of your cable
box or DSS receiver. Press CH A Y Keys
to select the same channel as the cable
box or DSS receiver output channel.
Press » to enter.
POWER
I an nna MRA
VCR
VCR/TV
SELECT/
SET
A PLAY
v:STOP
>:FF
ACTION
e ANTENNA CABLE
ar ae
Os
o 5
3 =
28
¡oa
37
Turn on your cable box and set it to
your Public Broadcasting Station
(PBS) channel in your time zone.
If you use DSS receiver, it must be
turned off.
CHA /v
Auto Set operation. The Channel/Clock
Setting is performed automatically.
If the setup is completed, the following
screen appears.
6 Press CH A Key to start Channel/Clock
[VCR [ CLOCK ] CHANNEL
5/13/2001 SUN 2:20PM
DST : 0
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
END ¿CH UP KEY
lf "Auto Clock Set is Incomplete"
screen appears, set the clock using
MANUAL CLOCK SET procedures
shown on page 9.
AUTO ook SET IS
INCOMPL!
PLEASE SET CLOCK BY
PRESSING ACTION KEY
11