Mounting - Yamaha PROFESSIONAL PC2002 Operating Manual

MOUNTING
PHYSICAL MOUNTING
Shelf Mounting
The PC2002M can be used on any surface, so long as there
is adequate ventilation. Do not remove the PC2002M's feet,
since this would prevent air flow below the amplifier.
Permanent Installation Rack Mounting
Mount the PC2002M in any standard 19" electronic
equipment rack as shown to the right. Leave adequate space
between the PC2002M and other devices in the rack for
ventilation, and for expected cabling. Cooling fans may be
required when the PC2002M must produce extremely high
average power output, or when it is located in a high
temperature environment, such as a closed outdoor building
in direct sunlight.
Rack Mounting for Portable Usage
Road cases must be durable enough to survive heavy
cartage, and airline travel. Brace the rear of the PC2002M,
and if the road case is small and ventilation is constricted,
install cooling fans. One possible design is shown in Figure
7-172"
П Ци
= лин И
м 9172" ——
" Front fan panel side-
view after folding.
»:27| Rear panel after folding.
1639
NOTE: Brace length assumes
a front-back rack depth of
15".
каа" Left braces for securing PC2002M т
rack, (For right braces, use same
measurements and flop.)
Front fan
panel installed .
Shelf
Shelf mounting
Perforated рапе!$ for air flow
PC2002M
РС2002М
Rear fan
panel installed
Fig. 22 — PC2002M with Cooling Fans
Extra rack strips mounted in back
of cabinet for mounting special
support brackets.
PC2002M mounted in rack showing support brackets
made from bent pieces of 1/8" steel rod with nuts
welded to their ends.