Rack Mounting - Yamaha P2500S Owner's Manual

Mounting in a standard EIA rack
If you are mounting multiple power amplifiers in a rack, be sure to install ventilation panel(s) as shown below. Also be sure to use metal brack-
ets (one on each side) to support the rear of each amplifer.
Note: EIA stands for Electronic Industries Alliance.
Ventilation panel(s)
Use 1U-size blank panel(s).
If mounting up to four amplifiers in
an open-backed rack
Install a ventilation panel as shown below.
Ventilation panel
(Attach to the front
or rear of the rack.)

Rack Mounting

480
Unit: mm
When mounting five or more amplifi-
ers in an open-backed rack, and
when mounting any number of
amplifiers in a close-backed rack
Install ventilation panels above and below each amplifier, as shown
below.
11