HighPoint Rocket 700L Series Manual page 8

1. Power on the system and boot the Linux distribution.
2. Download and prepare the Driver and Management Software from the product download page.
3. Open a system terminal with root privileges.
4. Browse to the directory where the driver download is located, and enter the following
commands to extract the Linux Opensource Driver software package.
#tar zxvf RR37xx_8xx_28xx_Linux_X86_64_Src_ vx.x.xx_xx_xx_xx.tar.gz
5. Install the Opensource Driver using the following command.
#sh rr37xx_8xx_28xx_linux_x86_64_src_vx.x.xx_xx_xx_xx.bin or
#./rr37xx_8xx_28xx_linux_x86_64_src_vx.x.xx_xx_xx_xx.bin
Note: The driver revision shown in the screenshots may not correspond with current software
releases. Please make sure to download the latest driver from the product's Software
Download page.
6. Enter the following commands to extract the Management software package.
#tar zxvf RAID_Manage_Linux_v3.x.x.x_x_x_x.tgz
7. Install the HighPoint Management software (WebGUI & CLI) using the following command:
#./RAID_Manage_Linux_v3.x.x_x_x_x.bin
9