2. Ensure that the motherboard on which the controller is installed has a network and check
the IP address.
If you are using Windows, run "Command Prompt" as Administrator and enter
a.
ipconfig and press Enter to check the IP address.
b.
If you are using Linux, open "Terminal" and enter root permissions, then execute the
command "ifconfig" to check the IP address.
3. Enter IP address:Port Number (default: 7402) in the browser of the remote host, you can
remote access to the controller.
For example: 192.168.0.245:7402
Port Number (default: 7402)
The default port that the HighPoint HRM listens on is 7402. You may change it to any open port.
15