Table of Contents
Advertisement
14
www.electrolux.com
The display can give the indication for 2
types of detergent (powder or liquid):
1. Press
some seconds.
The message "Set dosage det 1" comes
on in the text bar.
2. Press
that agrees with 100%. For the
maximum detergent quantity see the
detergent container.
10. DAILY USE
10.1 Using weight sensors
For a correct operation of
the weight sensor, activate
the appliance and set the
programme BEFORE you
put the laundry in the drum.
10.2 Activating the appliance
Press the
deactivate the appliance. A tune sounds
when the appliance is activated.
10.3 Setting a programme
1. Press one of the programme
touchpad to set the necessary
programme:
• The indicator
• The related programme indicator
comes on.
• The display shows all information
about washing programme.
2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options.
When you activate an option, the
indicator of the set option comes on.
If you set something
incorrect, the display shows
that the selection is not
possible.
10.4 Loading the laundry
1. Open the appliance door.
and
at the same time for
or
to set the data as ml
button to activate or
flashes.
3. Press
to confirm.
The message "Set dosage det 2" comes
on in the text bar.
4. Press
or
that agrees with 100%. For the
maximum detergent quantity see the
detergent container.
5. Press
to confirm.
The display shows the weight of the
laundry
and the maximum
programme load
tells to add the laundry.
2. Put the laundry in the drum, one item
at a time. Shake the items before you
put them in the appliance.
On the display, the weight of the laundry
updates by steps of kg 0,5. The weight is
a general indication that changes with
the type of the laundry.
In the programmes with the
maximum declared load, if
you put too much laundry,
the text bar tells that the load
is completed. In the other
programmes, the MAX
indicator flashes and the text
bar tells that the maximum
load is exceeded. To have
the best consumption and
performance remove some
items.
3. Close the door firmly.
The text bar shows the quantity of
detergent to use. If you have set the "Set
dosage det 1" and "Set dosage det 2",
the display gives the alternative between
two types of detergent.
to set the data as ml
. The text bar
Advertisement
Table of Contents
