]
Press [--_ DECK 2 OPEN], and
insert
the tape.
Close the holder by hand.
®
I
.............
"U .................
;;;;;:::
Tape direction is auton_cally
set to "D'.
]
Press [REV MODE] to select the reverse mode.
Everytime youpressthe button:
: One side is recorded, then recording stops auto-
matically.
: Both sides (front side _
reverse side) are
recorded, then recording stops automatically.
]Press
[CD].
]
Insert CD in the tray.
(Performstepsn _ [] on page 15),
]
Press [(CD 1) ~ (CD 5)] to select the disc you want.
Pressing [11]willstop playback.
]
Press [e REC/STOP]
to start recording.
•
if you selected" CT'_" in step [], the dtiection will
automatically change to = _)"
when recording starts.
•
The recording will proceed from the first track on the selected
CD and will continue on through the last track of the final
disc (page 15).
•
The tape deck stops automatically when the CD is finished.
To stop recording
•
To add a 4 second silent interval before stopping
Press [11].The CD will stop automatically too.
•
To stop recording without a silent interval
IN
Press [e REC/STOP], The CD will stop automatically too.
TO start recording
on the reverse side
Load a tape and change the tape direction as follows:
i
1. Press
[TAPE,
D ECK 1F2]and select tape deck 2.
2. Press [_1] and immediately thereafter [J]. The tape direction will
be shown as =<_".
B"
To reco_ from a spedflc
point on a tape
_.
Beforerecording, advance the tape to the point from where you want
to start recording.
==
To record
progrommed
hocks
I
1. Afterstep B, p_ngram the trackyouwant(perform steps []--_
on
page 17).
2. Press[e REC/STOP]to startrecording,
RQtZ=S8