Panasonic SC-AK29 Operating Instructions Manual page 17

III[=..1 llL[IJ ( _l[_oJl I |l[el [O]ll
CD
%
PROGRAM
%
DISC
%
k'] ;,IZ.......................... i:::::::::::7
: r _.n
i
I I-'1 U-_l i
You can program up to 24 backs.
a Pmss [CD].
EnsureCD is stopped.
] Press [PROGRAM].
] Press [DISC].
] (within 10 seconds or so)
Press [1] - [5] to select the disc you wanL
] Press the numeric button to select the desired track.
] Repeat steps [] through [] until you have prO-
grammed all the tracks you want.
F_ prass Ilk/IlIA].
Playwill startin the programmedsequence.
To cancel program play mode
Press [PROGRAM] In the stop mode.
programmed contents will be saved in memory.
Pressing [i] will cancel program play, but it will also erase the entire
program.
To select a two-digit track
Press [210] and then the two numbers you want.
When =CD FULL" appears []
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
You can do the following during program mode []
• Check program contents.
Press [P4<I/<I<I] or []HI_RH_.I].
Every time you press one of the buttons, the track and program No.
are shown on the display.
• Add to the program.
Repeat steps [] through [].
• Cancel entries.
From the last Press [CANCEL].
programmed track
A specified track Select the track with [1_1<1/<1<1] or
only [IIH_/tlHIH], and pre_ [CANCEL] within
3 saconds.
All tracks Press [11].
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
If you tumed OFF your program with [PROGRAM], you can play it
again as explained below.
1. Press [PROGRAM].
2. Press []_,,U/A].
If you program a track not on your CDs
Tile track is initially programmed, but during program play, the player
will skip that track and will continue playing from the next programmed
item.
i
o=.
!