Philips ADD6901 User Manual page 4

• Organic solvents such as gasoline shall not be used for wiping the housing of the dispenser. If
cleaning is required, please gently wipe the surface of the product with a wet cloth after it is
disconnected from power supply.
• If there is any abnormality, unplug the product from the power supply immediately, and do not
leave the defective dispenser in working mode.
• With an upgrade of the product certain words or pictures on the manual may be different from
the actual product, and the actual product shall govern in this case.
• If the user intends to extract ambient water or water of 45℃ immediately after extracting hot
water, some hot water may come out at the beginning, if so please watch out to avoid being burnt
by the hot water. It is recommended to extract ambient water for 10 seconds to cool down the
heating element.
• If the power cord appears to be damaged, please stop using the product. To avoid risks of danger,
the power cord must be replaced by personnel authorised by the manufacturer.
• Do not disassemble or repair it the dispenser by yourself, nor hand it over to any person not
authorized to repair, as improper repairing may cause risks of danger.
• The manufacturer will not bear responsibility for any consequences that are the results of failure to
operate the appliance in accordance with the above guidelines.
02