Step 5: Connecting The Powercord; Step 6: Preparingthe Remote - Sony RDR-GX315 Operating Instructions Manual

Step 5: Connecting the
PowerCord
Plug the recorder and TV power cords into an AC
outlet. Al:er you connect the power cord, you
must wait for a short while before
operating the recorder. You can operatethe
recorder umlyal:er the fror_tpanel display lights up
and the recorder enters standby mode.
If you connect additional equipment to this
recorder (page 26), be sure to connect the power
cord only al:er all connections are complete.
Step 6: Preparingthe
Remote
You can control the recorder using the supplied
remote. Insert two size AA (R6) batteries by
matching
the (_ and @ ends on the batteries to the
markings inside the battery compartment. When "_
using the remote, point it at the remote sensor []
on the recorder.
to AC outlet
• If the supplied remote interlk:rcs yeur ether Sony DVD
recorder or player, change the command mode number
fer this recerder (page 24).
• Use the batteries correctly to avoid possible leakage
and corresien. De net teuch file liquid with bare haMs
shouM leakage occur. Observe the fellowing:
Do not use a nc_ battery with an old battery, or
batteries of diflk:rcnt manufacturers.
Do net attempt to recharge the batteries.
If you, de not intend te use Ihe remote fi)r an extended
peried of time, remove the batteries.
Ifb ate U leakage occurs, wipe out any liquid inside
Ihe battery compartment, and insert new batteries.
• Do not expose the remote sensor (marked [] on the
front panel) to strong light, such as direct sunlight or
lighting apparatus. The recorder may net respeM to the
remete.
• With normal use, the batteries sheukl last about three te
six months.
• De net leave the rcmete in an extremely het er humid
place.
• Do net drep any fereign object into the rcmete casing,
particularly when replacing Ihe batteries.
,,_continued
19