Sony RDR-GX315 Operating Instructions Manual page 23

7
Select whether or notyou have a cable
connection.
Easy.Setup < ....
Select the way in which you '_11receiw
channels
Antenna
]
If you use an antenna only (no cable TV),
select "Antenna."
For all other connections, select "Cable."
8 Press ENTER.
Tile Tuner Preset function automatically starts
searching for all of the receivable channels
and presets them.
Easy,setup =: ....
Searching for rocoJvable channels 25
Please wait
|m@mow|)|))|)|)|)m)|)|)m)|)
To set the channels manually, see page 75.
After the Tuner Preset is finished, the setup
display for selecting the picture size of the
connected TV appears.
9 Select the setting that matches your TV
type.
Easy `setup 10:10
AE4
Sel_ your TV soreen t yp_
16:9
[,/4:3 LetterBox ]
4:3 PanScan
10
"4:3 Lettel Box": For standard TVs.
Displays "wide screen" pictures with bands
on the upper and lower sections of the screen.
"4:3 Pan Scan": For standaM TVs.
Automalically displays "wide screen"
pictures on the entire screen and ctlts off Ihe
sections Ihat do not fit.
"16:9": For wide-screen TVs or standard TVs
with a wide screen mode.
For details, see "Vide() Settings (Vide())" on
page 76.
Press ENTER.
The setup display R>r selecting the lype of
Dolby Digital signal appears.
Ea%, Setup 10:10 AN
Oolby Digital
]
Dolby Digital
11
Select the type of DolbyDigital signal you
want to send to your amplifier (receiver).
II your AV mnplilier (receiver) has a Dolby
Digital decoder, select "Dolby Digital."
Otherwise. selecl "[)-PCM.'
12
Press ENTER.
The setup display for selecting the lype of
DTS signal appears.
Ea£y Setup 10:10 AN
On
]
13
Select whether or notyou wantto send a
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amplitier (receiver) has a DTS
decoder, select "On." Otherwise. select "OFT."
212
-g
,,_continued
23